CISCO MDS 9000 SERIES LICENSE
CISCO MDS 9000 SERIES MAC

CISCO MDS 9000 SERIES LICENSE

Multiple Spanning Tree (MST) instance for FCoE VLANs.Д®nsure you have installed the correct license for FCoE.Д¬onfigure terminal Example: switch# configure terminal If you enable MST, you must use a separate In the SAN (for example, VLAN 1002 for VSAN 10, VLAN 1003 for VSAN 2, and so on). The default settings for FCoE parameters.Д¬onfiguring Virtual Interfaces Mapping a VSAN to a VLANДЄ unique, dedicated VLAN must be configured at every converged access switch to carry traffic for each virtual fabric (VSAN) The FCoE VLANs thatД¬orrespond to the VNP port VSANs must be configured on the bound Ethernet Multiple VSANs can be configured on the VNP port. ByДefault, the VNP port is enabled in trunk mode.

CISCO MDS 9000 SERIES MAC

Multiple FCoE nodes (ENodes), each with a unique ENodes MAC address. On the VNP port, the FCoE NPV bridge emulates an FCoE-capable host with Interfaces must be configured as VNP ports. Interface, a vFC interface must be created and bound to it. For each FCF connected to an Ethernet/port-channel These links can be individual Ethernet interfaces or portД¬hannel interfaces. Members of a port channel that a VE_Port is bound to is load balanced based onД¬onnectivity from an FCoE NPV bridge to the FCF is supported only over You can bind a VE port to a physical ethernet port or a port channel.Д¬ost E_Ports and VE_Ports based on SID, DID, and OXID. VE ports can connect multiple FCoE switches together A VF port can be attached to only one N port.ДЄ virtual expansion (VE) port acts as an expansion port in an FCoE network. Switch or port channel when the CNA connects to the Fibre Channel Forwarder (FCF)ДЄ virtual fabric (VF) port in an FCoE network acts as a fabric port that connects to a peripheral device (host or disk) Interface when the converged network adapter (CNA) is directly connected to the Interface mode) can be configured on virtual Fibre Channel interfaces.ДЄ virtual Fibre Channel (vfc) interface must be bound toДЄn interface before it can be used. The Fibre Channel portion of FCoE is configured asДЄ virtual Fibre Channel interface. Information About Virtual Fibre Channel (VFC) InterfacesДЇibre Channel over Ethernet (FCoE) allows Fibre ChannelДЄnd Ethernet traffic to be carried on the same physical Ethernet connection Verifying the Virtual Fibre Channel Interface.Information About Virtual Fibre Channel (VFC) Interfaces.VLANs and Virtual Fibre Channel Interfaces

Cisco mds 9000 series